From 2881fdea92e4e95a5b027f12035519b29e1537e3 Mon Sep 17 00:00:00 2001
From: maxcooper <maxcooper>
Date: Wed, 28 Aug 2002 00:08:03 +0000
Subject: [PATCH] this file is not needed

---
 conf/share/web-app_2_3.dtd | 1059 --------------------------------------------
 1 file changed, 1059 deletions(-)
 delete mode 100644 conf/share/web-app_2_3.dtd

diff --git a/conf/share/web-app_2_3.dtd b/conf/share/web-app_2_3.dtd
deleted file mode 100644
index b110d76..0000000
--- a/conf/share/web-app_2_3.dtd
+++ /dev/null
@@ -1,1059 +0,0 @@
-<!--
-Copyright 2000-2001 Sun Microsystems, Inc. 901 San Antonio Road,
-Palo Alto, CA  94303, U.S.A.  All rights reserved.
-
-This product or document is protected by copyright and distributed
-under licenses restricting its use, copying, distribution, and
-decompilation.  No part of this product or documentation may be
-reproduced in any form by any means without prior written authorization
-of Sun and its licensors, if any.
-
-Third party software, including font technology, is copyrighted and
-licensed from Sun suppliers.
-
-Sun, Sun Microsystems, the Sun Logo, Solaris, Java, JavaServer Pages, Java
-Naming and Directory Interface, JDBC, JDK, JavaMail and Enterprise JavaBeans,
-are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S.
-and other countries.
-
-All SPARC trademarks are used under license and are trademarks
-or registered trademarks of SPARC International, Inc.
-in the U.S. and other countries. Products bearing SPARC
-trademarks are based upon an architecture developed by Sun Microsystems, Inc.
-
-PostScript is a registered trademark of Adobe Systems, Inc.
-
-Federal Acquisitions: Commercial Software - Government Users Subject to
-Standard License Terms and Conditions.
-
-DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
-CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
-IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT
-TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
-INVALID.
-
-_________________________________________________________________________
-
-Copyright 2000-2001 Sun Microsystems, Inc.,
-901 San Antonio Road, Palo Alto, CA  94303, Etats-Unis.
-Tous droits re'serve's.
-
-
-Ce produit ou document est prote'ge' par un copyright et distribue' avec
-des licences qui en restreignent l'utilisation, la copie, la distribution,
-et la de'compilation.  Aucune partie de ce produit ou de sa documentation
-associe'e ne peut e^tre reproduite sous aucune forme, par quelque moyen
-que ce soit, sans l'autorisation pre'alable et e'crite de Sun et de ses
-bailleurs de licence, s'il y en a.
-
-Le logiciel de'tenu par des tiers, et qui comprend la technologie
-relative aux polices de caracte`res, est prote'ge' par un copyright
-et licencie' par des fournisseurs de Sun.
-
-Sun, Sun Microsystems, le logo Sun, Solaris, Java, JavaServer Pages, Java
-Naming and Directory Interface, JDBC, JDK, JavaMail, et Enterprise JavaBeans,
-sont des marques de fabrique ou des marques de'pose'es de Sun
-Microsystems, Inc. aux Etats-Unis et dans d'autres pays.
-
-Toutes les marques SPARC sont utilise'es sous licence et sont
-des marques de fabrique ou des marques de'pose'es de SPARC
-International, Inc. aux Etats-Unis et  dans
-d'autres pays. Les produits portant les marques SPARC sont
-base's sur une architecture de'veloppe'e par Sun Microsystems, Inc.
-
-Postcript est une marque enregistre'e d'Adobe Systems Inc.
-
-LA DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTES AUTRES CONDITIONS,
-DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES,
-DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
-TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE
-A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.
--->
-
-<!--
-This is the XML DTD for the Servlet 2.3 deployment descriptor.
-All Servlet 2.3 deployment descriptors must include a DOCTYPE
-of the following form:
-
-  <!DOCTYPE web-app PUBLIC
-	"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
-	"http://java.sun.com/dtd/web-app_2_3.dtd">
-
--->
-
-<!--
-The following conventions apply to all J2EE deployment descriptor
-elements unless indicated otherwise.
-
-- In elements that contain PCDATA, leading and trailing whitespace
-  in the data may be ignored.
-
-- In elements whose value is an "enumerated type", the value is
-  case sensitive.
-
-- In elements that specify a pathname to a file within the same
-  JAR file, relative filenames (i.e., those not starting with "/")
-  are considered relative to the root of the JAR file's namespace.
-  Absolute filenames (i.e., those starting with "/") also specify
-  names in the root of the JAR file's namespace.  In general, relative
-  names are preferred.  The exception is .war files where absolute
-  names are preferred for consistency with the servlet API.
--->
-
-
-<!--
-The web-app element is the root of the deployment descriptor for
-a web application.
--->
-<!ELEMENT web-app (icon?, display-name?, description?, distributable?,
-context-param*, filter*, filter-mapping*, listener*, servlet*,
-servlet-mapping*, session-config?, mime-mapping*, welcome-file-list?,
-error-page*, taglib*, resource-env-ref*, resource-ref*, security-constraint*,
-login-config?, security-role*, env-entry*, ejb-ref*,  ejb-local-ref*)>
-
-<!--
-The auth-constraint element indicates the user roles that should
-be permitted access to this resource collection. The role-name
-used here must either correspond to the role-name of one of the
-security-role elements defined for this web application, or be
-the specially reserved role-name "*" that is a compact syntax for
-indicating all roles in the web application. If both "*" and
-rolenames appear, the container interprets this as all roles.
-If no roles are defined, no user is allowed access to the portion of
-the web application described by the containing security-constraint.
-The container matches role names case sensitively when determining
-access.
-
-
-Used in: security-constraint
--->
-<!ELEMENT auth-constraint (description?, role-name*)>
-
-<!--
-The auth-method element is used to configure the authentication
-mechanism for the web application. As a prerequisite to gaining access to any web resources which are protected by an authorization
-constraint, a user must have authenticated using the configured
-mechanism. Legal values for this element are "BASIC", "DIGEST",
-"FORM", or "CLIENT-CERT".
-
-Used in: login-config
--->
-<!ELEMENT auth-method (#PCDATA)>
-
-<!--
-The context-param element contains the declaration of a web
-application's servlet context initialization parameters.
-
-Used in: web-app
--->
-<!ELEMENT context-param (param-name, param-value, description?)>
-
-<!--
-The description element is used to provide text describing the parent
-element.  The description element should include any information that
-the web application war file producer wants to provide to the consumer of
-the web application war file (i.e., to the Deployer). Typically, the tools
-used by the web application war file consumer will display the description
-when processing the parent element that contains the description.
-
-Used in: auth-constraint, context-param, ejb-local-ref, ejb-ref,
-env-entry, filter, init-param, resource-env-ref, resource-ref, run-as,
-security-role, security-role-ref, servlet, user-data-constraint,
-web-app, web-resource-collection
--->
-<!ELEMENT description (#PCDATA)>
-
-<!--
-The display-name element contains a short name that is intended to be
-displayed by tools.  The display name need not be unique.
-
-Used in: filter, security-constraint, servlet, web-app
-
-Example:
-
-<display-name>Employee Self Service</display-name>
--->
-<!ELEMENT display-name (#PCDATA)>
-
-<!--
-The distributable element, by its presence in a web application
-deployment descriptor, indicates that this web application is
-programmed appropriately to be deployed into a distributed servlet
-container
-
-Used in: web-app
--->
-<!ELEMENT distributable EMPTY>
-
-<!--
-The ejb-link element is used in the ejb-ref or ejb-local-ref
-elements to specify that an EJB reference is linked to an
-enterprise bean.
-
-The name in the ejb-link element is composed of a
-path name specifying the ejb-jar containing the referenced enterprise
-bean with the ejb-name of the target bean appended and separated from
-the path name by "#".  The path name is relative to the war file
-containing the web application that is referencing the enterprise bean.
-This allows multiple enterprise beans with the same ejb-name to be
-uniquely identified.
-
-Used in: ejb-local-ref, ejb-ref
-
-Examples:
-
-	<ejb-link>EmployeeRecord</ejb-link>
-
-	<ejb-link>../products/product.jar#ProductEJB</ejb-link>
-
--->
-<!ELEMENT ejb-link (#PCDATA)>
-
-<!--
-The ejb-local-ref element is used for the declaration of a reference to
-an enterprise bean's local home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of the web application
-	  that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected local home and local interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: web-app
--->
-<!ELEMENT ejb-local-ref (description?, ejb-ref-name, ejb-ref-type,
-		local-home, local, ejb-link?)>
-
-<!--
-The ejb-ref element is used for the declaration of a reference to
-an enterprise bean's home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of
-	  the web application that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected home and remote interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: web-app
--->
-<!ELEMENT ejb-ref (description?, ejb-ref-name, ejb-ref-type,
-		home, remote, ejb-link?)>
-
-<!--
-The ejb-ref-name element contains the name of an EJB reference. The
-EJB reference is an entry in the web application's environment and is
-relative to the java:comp/env context.  The name must be unique
-within the web application.
-
-It is recommended that name is prefixed with "ejb/".
-
-Used in: ejb-local-ref, ejb-ref
-
-Example:
-
-<ejb-ref-name>ejb/Payroll</ejb-ref-name>
--->
-<!ELEMENT ejb-ref-name (#PCDATA)>
-
-<!--
-The ejb-ref-type element contains the expected type of the
-referenced enterprise bean.
-
-The ejb-ref-type element must be one of the following:
-
-	<ejb-ref-type>Entity</ejb-ref-type>
-	<ejb-ref-type>Session</ejb-ref-type>
-
-Used in: ejb-local-ref, ejb-ref
--->
-<!ELEMENT ejb-ref-type (#PCDATA)>
-
-<!--
-The env-entry element contains the declaration of a web application's
-environment entry. The declaration consists of an optional
-description, the name of the environment entry, and an optional
-value.  If a value is not specified, one must be supplied
-during deployment.
--->
-<!ELEMENT env-entry (description?, env-entry-name, env-entry-value?,
-env-entry-type)>
-
-<!--
-The env-entry-name element contains the name of a web applications's
-environment entry.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within a web application.
-
-Example:
-
-<env-entry-name>minAmount</env-entry-name>
-
-Used in: env-entry
--->
-<!ELEMENT env-entry-name (#PCDATA)>
-
-<!--
-The env-entry-type element contains the fully-qualified Java type of
-the environment entry value that is expected by the web application's
-code.
-
-The following are the legal values of env-entry-type:
-
-	java.lang.Boolean
-	java.lang.Byte
-	java.lang.Character
-	java.lang.String
-	java.lang.Short
-	java.lang.Integer
-	java.lang.Long
-	java.lang.Float
-	java.lang.Double
-
-Used in: env-entry
--->
-<!ELEMENT env-entry-type (#PCDATA)>
-
-<!--
-The env-entry-value element contains the value of a web application's
-environment entry. The value must be a String that is valid for the
-constructor of the specified type that takes a single String
-parameter, or for java.lang.Character, a single character.
-
-Example:
-
-<env-entry-value>100.00</env-entry-value>
-
-Used in: env-entry
--->
-<!ELEMENT env-entry-value (#PCDATA)>
-
-<!--
-The error-code contains an HTTP error code, ex: 404
-
-Used in: error-page
--->
-<!ELEMENT error-code (#PCDATA)>
-
-<!--
-The error-page element contains a mapping between an error code
-or exception type to the path of a resource in the web application
-
-Used in: web-app
--->
-<!ELEMENT error-page ((error-code | exception-type), location)>
-
-<!--
-The exception type contains a fully qualified class name of a
-Java exception type.
-
-Used in: error-page
--->
-<!ELEMENT exception-type (#PCDATA)>
-
-<!--
-The extension element contains a string describing an
-extension. example: "txt"
-
-Used in: mime-mapping
--->
-<!ELEMENT extension (#PCDATA)>
-
-<!--
-Declares a filter in the web application. The filter is mapped to
-either a servlet or a URL pattern in the filter-mapping element, using
-the filter-name value to reference. Filters can access the
-initialization parameters declared in the deployment descriptor at
-runtime via the FilterConfig interface.
-
-Used in: web-app
--->
-<!ELEMENT filter (icon?, filter-name, display-name?, description?,
-filter-class, init-param*)>
-
-<!--
-The fully qualified classname of the filter.
-
-Used in: filter
--->
-<!ELEMENT filter-class (#PCDATA)>
-
-<!--
-Declaration of the filter mappings in this web application. The
-container uses the filter-mapping declarations to decide which filters
-to apply to a request, and in what order. The container matches the
-request URI to a Servlet in the normal way. To determine which filters
-to apply it matches filter-mapping declarations either on servlet-name,
-or on url-pattern for each filter-mapping element, depending on which
-style is used. The order in which filters are invoked is the order in
-which filter-mapping declarations that match a request URI for a
-servlet appear in the list of filter-mapping elements.The filter-name
-value must be the value of the <filter-name> sub-elements of one of the
-<filter> declarations in the deployment descriptor.
-
-Used in: web-app
--->
-<!ELEMENT filter-mapping (filter-name, (url-pattern | servlet-name))>
-
-<!--
-The logical name of the filter. This name is used to map the filter.
-Each filter name is unique within the web application.
-
-Used in: filter, filter-mapping
--->
-<!ELEMENT filter-name (#PCDATA)>
-
-<!--
-The form-error-page element defines the location in the web app
-where the error page that is displayed when login is not successful
-can be found. The path begins with a leading / and is interpreted
-relative to the root of the WAR.
-
-Used in: form-login-config
--->
-<!ELEMENT form-error-page (#PCDATA)>
-
-<!--
-The form-login-config element specifies the login and error pages
-that should be used in form based login. If form based authentication
-is not used, these elements are ignored.
-
-Used in: login-config
--->
-<!ELEMENT form-login-config (form-login-page, form-error-page)>
-
-<!--
-The form-login-page element defines the location in the web app
-where the page that can be used for login can be found. The path
-begins with a leading / and is interpreted relative to the root of the WAR.
-
-Used in: form-login-config
--->
-<!ELEMENT form-login-page (#PCDATA)>
-
-<!--
-The home element contains the fully-qualified name of the enterprise
-bean's home interface.
-
-Used in: ejb-ref
-
-Example:
-
-<home>com.aardvark.payroll.PayrollHome</home>
--->
-<!ELEMENT home (#PCDATA)>
-
-<!--
-The http-method contains an HTTP method (GET | POST |...).
-
-Used in: web-resource-collection
--->
-<!ELEMENT http-method (#PCDATA)>
-
-<!--
-The icon element contains small-icon and large-icon elements that
-specify the file names for small and a large GIF or JPEG icon images
-used to represent the parent element in a GUI tool.
-
-Used in: filter, servlet, web-app
--->
-<!ELEMENT icon (small-icon?, large-icon?)>
-
-<!--
-The init-param element contains a name/value pair as an
-initialization param of the servlet
-
-Used in: filter, servlet
--->
-<!ELEMENT init-param (param-name, param-value, description?)>
-
-<!--
-The jsp-file element contains the full path to a JSP file within
-the web application beginning with a `/'.
-
-Used in: servlet
--->
-<!ELEMENT jsp-file (#PCDATA)>
-
-<!--
-The large-icon element contains the name of a file
-containing a large (32 x 32) icon image. The file
-name is a relative path within the web application's
-war file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: icon
-
-Example:
-
-<large-icon>employee-service-icon32x32.jpg</large-icon>
--->
-<!ELEMENT large-icon (#PCDATA)>
-
-<!--
-The listener element indicates the deployment properties for a web
-application listener bean.
-
-Used in: web-app
--->
-<!ELEMENT listener (listener-class)>
-
-<!--
-The listener-class element declares a class in the application must be
-registered as a web application listener bean. The value is the fully qualified classname of the listener class.
-
-
-Used in: listener
--->
-<!ELEMENT listener-class (#PCDATA)>
-
-<!--
-The load-on-startup element indicates that this servlet should be
-loaded (instantiated and have its init() called) on the startup
-of the web application. The optional contents of
-these element must be an integer indicating the order in which
-the servlet should be loaded. If the value is a negative integer,
-or the element is not present, the container is free to load the
-servlet whenever it chooses. If the value is a positive integer
-or 0, the container must load and initialize the servlet as the
-application is deployed. The container must guarantee that
-servlets marked with lower integers are loaded before servlets
-marked with higher integers. The container may choose the order
-of loading of servlets with the same load-on-start-up value.
-
-Used in: servlet
--->
-<!ELEMENT load-on-startup (#PCDATA)>
-
-<!--
-
-The local element contains the fully-qualified name of the
-enterprise bean's local interface.
-
-Used in: ejb-local-ref
-
--->
-<!ELEMENT local (#PCDATA)>
-
-<!--
-
-The local-home element contains the fully-qualified name of the
-enterprise bean's local home interface.
-
-Used in: ejb-local-ref
--->
-<!ELEMENT local-home (#PCDATA)>
-
-<!--
-The location element contains the location of the resource in the web
-application relative to the root of the web application. The value of
-the location must have a leading `/'.
-
-Used in: error-page
--->
-<!ELEMENT location (#PCDATA)>
-
-<!--
-The login-config element is used to configure the authentication
-method that should be used, the realm name that should be used for
-this application, and the attributes that are needed by the form login
-mechanism.
-
-Used in: web-app
--->
-<!ELEMENT login-config (auth-method?, realm-name?, form-login-config?)>
-
-<!--
-The mime-mapping element defines a mapping between an extension
-and a mime type.
-
-Used in: web-app
--->
-<!ELEMENT mime-mapping (extension, mime-type)>
-
-<!--
-The mime-type element contains a defined mime type. example:
-"text/plain"
-
-Used in: mime-mapping
--->
-<!ELEMENT mime-type (#PCDATA)>
-
-<!--
-The param-name element contains the name of a parameter. Each parameter
-name must be unique in the web application.
-
-
-Used in: context-param, init-param
--->
-<!ELEMENT param-name (#PCDATA)>
-
-<!--
-The param-value element contains the value of a parameter.
-
-Used in: context-param, init-param
--->
-<!ELEMENT param-value (#PCDATA)>
-
-<!--
-The realm name element specifies the realm name to use in HTTP
-Basic authorization.
-
-Used in: login-config
--->
-<!ELEMENT realm-name (#PCDATA)>
-
-<!--
-The remote element contains the fully-qualified name of the enterprise
-bean's remote interface.
-
-Used in: ejb-ref
-
-Example:
-
-<remote>com.wombat.empl.EmployeeService</remote>
--->
-<!ELEMENT remote (#PCDATA)>
-
-<!--
-The res-auth element specifies whether the web application code signs
-on programmatically to the resource manager, or whether the Container
-will sign on to the resource manager on behalf of the web application. In the
-latter case, the Container uses information that is supplied by the
-Deployer.
-
-The value of this element must be one of the two following:
-
-	<res-auth>Application</res-auth>
-	<res-auth>Container</res-auth>
-
-Used in: resource-ref
--->
-<!ELEMENT res-auth (#PCDATA)>
-
-<!--
-The res-ref-name element specifies the name of a resource manager
-connection factory reference.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within a web application.
-
-Used in: resource-ref
--->
-<!ELEMENT res-ref-name (#PCDATA)>
-
-<!--
-The res-sharing-scope element specifies whether connections obtained
-through the given resource manager connection factory reference can be
-shared. The value of this element, if specified, must be one of the
-two following:
-
-	<res-sharing-scope>Shareable</res-sharing-scope>
-	<res-sharing-scope>Unshareable</res-sharing-scope>
-
-The default value is Shareable.
-
-Used in: resource-ref
--->
-<!ELEMENT res-sharing-scope (#PCDATA)>
-
-<!--
-The res-type element specifies the type of the data source. The type
-is specified by the fully qualified Java language class or interface
-expected to be implemented by the data source.
-
-Used in: resource-ref
--->
-<!ELEMENT res-type (#PCDATA)>
-
-<!--
-The resource-env-ref element contains a declaration of a web application's
-reference to an administered object associated with a resource
-in the web application's environment.  It consists of an optional
-description, the resource environment reference name, and an
-indication of the resource environment reference type expected by
-the web application code.
-
-Used in: web-app
-
-Example:
-
-<resource-env-ref>
-    <resource-env-ref-name>jms/StockQueue</resource-env-ref-name>
-    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
-</resource-env-ref>
--->
-<!ELEMENT resource-env-ref (description?, resource-env-ref-name,
-		resource-env-ref-type)>
-
-<!--
-The resource-env-ref-name element specifies the name of a resource
-environment reference; its value is the environment entry name used in
-the web application code.  The name is a JNDI name relative to the
-java:comp/env context and must be unique within a web application.
-
-Used in: resource-env-ref
--->
-<!ELEMENT resource-env-ref-name (#PCDATA)>
-
-<!--
-The resource-env-ref-type element specifies the type of a resource
-environment reference.  It is the fully qualified name of a Java
-language class or interface.
-
-Used in: resource-env-ref
--->
-<!ELEMENT resource-env-ref-type (#PCDATA)>
-
-<!--
-The resource-ref element contains a declaration of a web application's
-reference to an external resource. It consists of an optional
-description, the resource manager connection factory reference name,
-the indication of the resource manager connection factory type
-expected by the web application code, the type of authentication
-(Application or Container), and an optional specification of the
-shareability of connections obtained from the resource (Shareable or
-Unshareable).
-
-Used in: web-app
-
-Example:
-
-    <resource-ref>
-	<res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
-	<res-type>javax.sql.DataSource</res-type>
-	<res-auth>Container</res-auth>
-	<res-sharing-scope>Shareable</res-sharing-scope>
-    </resource-ref>
--->
-<!ELEMENT resource-ref (description?, res-ref-name, res-type, res-auth,
-		res-sharing-scope?)>
-
-<!--
-The role-link element is a reference to a defined security role. The
-role-link element must contain the name of one of the security roles
-defined in the security-role elements.
-
-Used in: security-role-ref
--->
-<!ELEMENT role-link (#PCDATA)>
-
-<!--
-The role-name element contains the name of a security role.
-
-The name must conform to the lexical rules for an NMTOKEN.
-
-Used in: auth-constraint, run-as, security-role, security-role-ref
--->
-<!ELEMENT role-name (#PCDATA)>
-
-<!--
-The run-as element specifies the run-as identity to be used for the
-execution of the web application. It contains an optional description, and
-the name of a security role.
-
-Used in: servlet
--->
-<!ELEMENT run-as (description?, role-name)>
-
-<!--
-The security-constraint element is used to associate security
-constraints with one or more web resource collections
-
-Used in: web-app
--->
-<!ELEMENT security-constraint (display-name?, web-resource-collection+,
-auth-constraint?, user-data-constraint?)>
-
-<!--
-The security-role element contains the definition of a security
-role. The definition consists of an optional description of the
-security role, and the security role name.
-
-Used in: web-app
-
-Example:
-
-    <security-role>
-	<description>
-	    This role includes all employees who are authorized
-	    to access the employee service application.
-	</description>
-	<role-name>employee</role-name>
-    </security-role>
--->
-<!ELEMENT security-role (description?, role-name)>
-
-<!--
-The security-role-ref element contains the declaration of a security
-role reference in the web application's code. The declaration consists
-of an optional description, the security role name used in the code,
-and an optional link to a security role. If the security role is not
-specified, the Deployer must choose an appropriate security role.
-
-The value of the role-name element must be the String used as the
-parameter to the EJBContext.isCallerInRole(String roleName) method
-or the HttpServletRequest.isUserInRole(String role) method.
-
-Used in: servlet
-
--->
-<!ELEMENT security-role-ref (description?, role-name, role-link?)>
-
-<!--
-The servlet element contains the declarative data of a
-servlet. If a jsp-file is specified and the load-on-startup element is
-present, then the JSP should be precompiled and loaded.
-
-Used in: web-app
--->
-<!ELEMENT servlet (icon?, servlet-name, display-name?, description?,
-(servlet-class|jsp-file), init-param*, load-on-startup?, run-as?, security-role-ref*)>
-
-<!--
-The servlet-class element contains the fully qualified class name
-of the servlet.
-
-Used in: servlet
--->
-<!ELEMENT servlet-class (#PCDATA)>
-
-<!--
-The servlet-mapping element defines a mapping between a servlet
-and a url pattern
-
-Used in: web-app
--->
-<!ELEMENT servlet-mapping (servlet-name, url-pattern)>
-
-<!--
-The servlet-name element contains the canonical name of the
-servlet. Each servlet name is unique within the web application.
-
-Used in: filter-mapping, servlet, servlet-mapping
--->
-<!ELEMENT servlet-name (#PCDATA)>
-
-<!--
-The session-config element defines the session parameters for
-this web application.
-
-Used in: web-app
--->
-<!ELEMENT session-config (session-timeout?)>
-
-<!--
-The session-timeout element defines the default session timeout
-interval for all sessions created in this web application. The
-specified timeout must be expressed in a whole number of minutes.
-If the timeout is 0 or less, the container ensures the default
-behaviour of sessions is never to time out.
-
-Used in: session-config
--->
-<!ELEMENT session-timeout (#PCDATA)>
-
-<!--
-The small-icon element contains the name of a file
-containing a small (16 x 16) icon image. The file
-name is a relative path within the web application's
-war file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: icon
-
-Example:
-
-<small-icon>employee-service-icon16x16.jpg</small-icon>
--->
-<!ELEMENT small-icon (#PCDATA)>
-
-<!--
-The taglib element is used to describe a JSP tag library.
-
-Used in: web-app
--->
-<!ELEMENT taglib (taglib-uri, taglib-location)>
-
-<!--
-the taglib-location element contains the location (as a resource
-relative to the root of the web application) where to find the Tag
-Libary Description file for the tag library.
-
-Used in: taglib
--->
-<!ELEMENT taglib-location (#PCDATA)>
-
-<!--
-The taglib-uri element describes a URI, relative to the location
-of the web.xml document, identifying a Tag Library used in the Web
-Application.
-
-Used in: taglib
--->
-<!ELEMENT taglib-uri (#PCDATA)>
-
-<!--
-The transport-guarantee element specifies that the communication
-between client and server should be NONE, INTEGRAL, or
-CONFIDENTIAL. NONE means that the application does not require any
-transport guarantees. A value of INTEGRAL means that the application
-requires that the data sent between the client and server be sent in
-such a way that it can't be changed in transit. CONFIDENTIAL means
-that the application requires that the data be transmitted in a
-fashion that prevents other entities from observing the contents of
-the transmission. In most cases, the presence of the INTEGRAL or
-CONFIDENTIAL flag will indicate that the use of SSL is required.
-
-Used in: user-data-constraint
--->
-<!ELEMENT transport-guarantee (#PCDATA)>
-
-<!--
-The url-pattern element contains the url pattern of the mapping. Must
-follow the rules specified in Section 11.2 of the Servlet API
-Specification.
-
-Used in: filter-mapping, servlet-mapping, web-resource-collection
--->
-<!ELEMENT url-pattern (#PCDATA)>
-
-<!--
-The user-data-constraint element is used to indicate how data
-communicated between the client and container should be protected.
-
-Used in: security-constraint
--->
-<!ELEMENT user-data-constraint (description?, transport-guarantee)>
-
-<!--
-The web-resource-collection element is used to identify a subset
-of the resources and HTTP methods on those resources within a web
-application to which a security constraint applies. If no HTTP methods
-are specified, then the security constraint applies to all HTTP
-methods.
-
-Used in: security-constraint
--->
-<!ELEMENT web-resource-collection (web-resource-name, description?,
-url-pattern*, http-method*)>
-
-<!--
-The web-resource-name contains the name of this web resource
-collection.
-
-Used in: web-resource-collection
--->
-<!ELEMENT web-resource-name (#PCDATA)>
-
-<!--
-The welcome-file element contains file name to use as a default
-welcome file, such as index.html
-
-Used in: welcome-file-list
--->
-<!ELEMENT welcome-file (#PCDATA)>
-
-<!--
-The welcome-file-list contains an ordered list of welcome files
-elements.
-
-Used in: web-app
--->
-<!ELEMENT welcome-file-list (welcome-file+)>
-
-<!--
-The ID mechanism is to allow tools that produce additional deployment
-information (i.e., information beyond the standard deployment
-descriptor information) to store the non-standard information in a
-separate file, and easily refer from these tool-specific files to the
-information in the standard deployment descriptor.
-
-Tools are not allowed to add the non-standard information into the
-standard deployment descriptor.
--->
-
-<!ATTLIST auth-constraint id ID #IMPLIED>
-<!ATTLIST auth-method id ID #IMPLIED>
-<!ATTLIST context-param id ID #IMPLIED>
-<!ATTLIST description id ID #IMPLIED>
-<!ATTLIST display-name id ID #IMPLIED>
-<!ATTLIST distributable id ID #IMPLIED>
-<!ATTLIST ejb-link id ID #IMPLIED>
-<!ATTLIST ejb-local-ref id ID #IMPLIED>
-<!ATTLIST ejb-ref id ID #IMPLIED>
-<!ATTLIST ejb-ref-name id ID #IMPLIED>
-<!ATTLIST ejb-ref-type id ID #IMPLIED>
-<!ATTLIST env-entry id ID #IMPLIED>
-<!ATTLIST env-entry-name id ID #IMPLIED>
-<!ATTLIST env-entry-type id ID #IMPLIED>
-<!ATTLIST env-entry-value id ID #IMPLIED>
-<!ATTLIST error-code id ID #IMPLIED>
-<!ATTLIST error-page id ID #IMPLIED>
-<!ATTLIST exception-type id ID #IMPLIED>
-<!ATTLIST extension id ID #IMPLIED>
-<!ATTLIST filter id ID #IMPLIED>
-<!ATTLIST filter-class id ID #IMPLIED>
-<!ATTLIST filter-mapping id ID #IMPLIED>
-<!ATTLIST filter-name id ID #IMPLIED>
-<!ATTLIST form-error-page id ID #IMPLIED>
-<!ATTLIST form-login-config id ID #IMPLIED>
-<!ATTLIST form-login-page id ID #IMPLIED>
-<!ATTLIST home id ID #IMPLIED>
-<!ATTLIST http-method id ID #IMPLIED>
-<!ATTLIST icon id ID #IMPLIED>
-<!ATTLIST init-param id ID #IMPLIED>
-<!ATTLIST jsp-file id ID #IMPLIED>
-<!ATTLIST large-icon id ID #IMPLIED>
-<!ATTLIST listener id ID #IMPLIED>
-<!ATTLIST listener-class id ID #IMPLIED>
-<!ATTLIST load-on-startup id ID #IMPLIED>
-<!ATTLIST local id ID #IMPLIED>
-<!ATTLIST local-home id ID #IMPLIED>
-<!ATTLIST location id ID #IMPLIED>
-<!ATTLIST login-config id ID #IMPLIED>
-<!ATTLIST mime-mapping id ID #IMPLIED>
-<!ATTLIST mime-type id ID #IMPLIED>
-<!ATTLIST param-name id ID #IMPLIED>
-<!ATTLIST param-value id ID #IMPLIED>
-<!ATTLIST realm-name id ID #IMPLIED>
-<!ATTLIST remote id ID #IMPLIED>
-<!ATTLIST res-auth id ID #IMPLIED>
-<!ATTLIST res-ref-name id ID #IMPLIED>
-<!ATTLIST res-sharing-scope id ID #IMPLIED>
-<!ATTLIST res-type id ID #IMPLIED>
-<!ATTLIST resource-env-ref id ID #IMPLIED>
-<!ATTLIST resource-env-ref-name id ID #IMPLIED>
-<!ATTLIST resource-env-ref-type id ID #IMPLIED>
-<!ATTLIST resource-ref id ID #IMPLIED>
-<!ATTLIST role-link id ID #IMPLIED>
-<!ATTLIST role-name id ID #IMPLIED>
-<!ATTLIST run-as id ID #IMPLIED>
-<!ATTLIST security-constraint id ID #IMPLIED>
-<!ATTLIST security-role id ID #IMPLIED>
-<!ATTLIST security-role-ref id ID #IMPLIED>
-<!ATTLIST servlet id ID #IMPLIED>
-<!ATTLIST servlet-class id ID #IMPLIED>
-<!ATTLIST servlet-mapping id ID #IMPLIED>
-<!ATTLIST servlet-name id ID #IMPLIED>
-<!ATTLIST session-config id ID #IMPLIED>
-<!ATTLIST session-timeout id ID #IMPLIED>
-<!ATTLIST small-icon id ID #IMPLIED>
-<!ATTLIST taglib id ID #IMPLIED>
-<!ATTLIST taglib-location id ID #IMPLIED>
-<!ATTLIST taglib-uri id ID #IMPLIED>
-<!ATTLIST transport-guarantee id ID #IMPLIED>
-<!ATTLIST url-pattern id ID #IMPLIED>
-<!ATTLIST user-data-constraint id ID #IMPLIED>
-<!ATTLIST web-app id ID #IMPLIED>
-<!ATTLIST web-resource-collection id ID #IMPLIED>
-<!ATTLIST web-resource-name id ID #IMPLIED>
-<!ATTLIST welcome-file id ID #IMPLIED>
-<!ATTLIST welcome-file-list id ID #IMPLIED>
-- 
2.11.0